SP-01 and SP-22 Power Bank User Manual
Product Components Introduction
Charging Power Bank using computer slot
1) To Charge the Power bank, use the micro connector supplied and plug into the INPUT port on one side then plug into the computer USB slot on the other side. The LED light will turn to RED color during charging and the LED light will be off when the power bank is fully charged.
2) LED Flashlight usage: click the flashlight button one to turn on and off (For SP-22 model)
3) SP-01 and SP-22 power bank fit all digital products with DC-5V output.
3) Please Charge overnight for first time usage.
4) Standard charging time using the computer USB slot is about 4-5 hours to fully charged the power bank.
Charging Mobile phone using Power Bank
1) Plug USB cable to Power Bank output port and connect other side with adaptable connector to the mobile phone. Press the on/off button on the power bank to turn on the power to charge the mobile phone. The LED light will turn to Blue color during the charging time. There are no LED indication signal for these two models when the mobile phone is fully charged. Please pay attention to your mobile phone on the battery level during the charging time.
SP-52 Power Bank User Manual
Product Components Introduction
Charging SP-52 Power Bank using computer slot
1) To Charge the Power bank, use the micro connector supplied and plug into the INPUT port on one side then plug into the computer USB slot on the other side. The LED light will turn to blinking blue color during charging and the Blue LED light will be static when the power bank is fully charged.
2) Press the on/off button twice repeatedly will display the battery level on the power bank. One blue LED indicates battery left about 25%, two blue LED 50%….
Charging Mobile phone using Power Bank SP-52
1) Plug USB cable to Power Bank output port and connect other side with adaptable connector to the mobile phone. Press the on/off button once on the power bank to turn on the power to charge the mobile phone. The Blue LED light will turn off during the charging time. There are no LED indication signal for these when the mobile phone is fully charged. Please pay attention to your mobile phone on the battery level during the charging time.
SP-13 Power Bank User Manual
Product Components introduction
Charging SP-13 Power Bank using computer slot
1) To Charge the Power bank, use the micro connector supplied and plug into the INPUT port on one side then plug into the computer USB slot on the other side. The LED light will turn to blinking blue color during charging and the Blue LED light will be static when the power bank is fully charged.
2) Press the on/off button once will display the battery level on the power bank. One blue LED indicates battery left about 25%, two blue LED 50%….LED battery indicator will be auto off in 20 sec if no activity.
3) Double press the on/off button to turn on/off the LED torchlight.
4) Long press the on/off button to turn on/off the emergency blinking LED torchlight.
Charging Mobile phone using Power Bank SP-13
1) Plug USB cable to Power Bank output port and connect other side with adaptable connector to the mobile phone. Press the on/off button once on the power bank to turn on the power to charge the mobile phone. The Blue LED light will turn on during the charging time. Please pay attention to your mobile phone on the battery level during the charging time.
Troubleshoot
The Power Bank could not be recharged using the usb computer slot.
1) The connection of the cable might be loose, try to reseat charge cord and make sure the connection is firm and steady.
2) Faulty power bank – please contact us for repair/refund/exchange during the warranty period.
The Power Bank fails to charge the mobile phone or other electronic devices
1) The power level of the power bank is too low, recharge the power bank.
2) The electronic devices might have incompatible voltage with the power bank output voltage. Please check the output of the digital devices.
3) Connection of the cable and connector might be loose, try reseat charge cord and make sure the connection is firm and steady.